A Running Outlet is the fitting which connects the guttering to the downpipe. Essentially a tee piece, running outlets can be used at either the centre or the end of the run of gutter. If the outlet is installed at the end then a short piece of gutter with an external stopend attached is used to extend the gutter past the end of the brickwork to catch any rainfall from the overhanging tiles. The ogee outlet has moulded screwholes to enable it to be fixed back to the fascia board. The downpipe connection is a simple push fit onto our 68mm round downpipe or 65mm square downpipe using its clever octagonal moulding.
FloPlast recommend the use of lubricant on all gutter seals for ease of fitting and improved performance.
Key Features:
- A traditional ogee style profile.
- One of the highest capacity PVC-U domestic rainwater systems.
- Water-tight seal and retaining clip pre-fitted for fast user friendly installation.
- Suitable for all properties, old and new.
- Running Outlet (RON1) can be connected to either 65mm Square or 68mm Round downpipes.
- Running outlet designed to cope with above average rainfall.
