The fermacell Jointstick greenline is a hazard label-free, moisture cross-linked polyurethane-based, oready mixed adhesive. The adhesive does not foam up during the setting process; it is tough-elastic once hardened.
Application
For jointing square edged fermacell Gypsum Fibreboards for walls and ceilings and for jointing fermacell Powerpanel H2O in high humidity exposure areas – class A0 (pursuant to ZDB info sheet). Not suitable for the subsequent filling/bonding of joints.
Features and Properties
- No hazard label, low in harmful substances and emissions – tested by eco-Institut Cologne
- Free of isocyanates, plasticizers, silicone and solvents (pursuant to TRGS 610)
- Easy to use – bonds and fills joints at the same time – optimised application for walls and ceilings
- Special applicator nozzle that dispenses the correct amount of adhesive right in the middle of the joint
- High joint strength
- No cracks in the joints when applied correctly
- Full board strength even for un- supported horizontal joints
- Easy cleaning of material, tool etc.
- The ready mixed adhesive is easy to apply; the special applicator nozzle provides the correct amount needed, right into the middle of the joint
- If applied correctly, Fermacell Jointstick provides a high strength joint, without any cracks.
- Size: 310ml
- Colour: Beige
- Coverage: 20 linear meters
- Drying Time: 18 – 36hours for best results
- Ensuring perfect results for any application; this joint stick is part of an accessories range for installation of Fermacell Fibreboards
- It is recommended, when working with Fermacell Jointsitck that protective gloves are worn and that skin, eyes, tools and clothing do not come into contact with unhardened adhesive
- If this does happen, immediately wash with water and soap
