Rivendale fibre cement roof slate features a riven surface and dressed edge, combining the benefit of modern slate technology with the look of natural slate.
Ideal for use on projects where a natural look is sought, the Rivendale has been used on a number of projects, where sustainability is high priority.
Advantages:
- Environmental product declaration available
- Can achieve an BES 6001 ‘Very Good’ rating
- Full roof system
- Can be used for both roof and facade
- Fibre cement is a 100% recyclable building material
- Low carbon footprint of 13 CO2e/m2
- Request a copy of A+D, Building with Fibre Cement
Technical specifications:
- Size of Tile: 600mm x 300mm
- Maximum Pitch: 90°
- Minimum Headlap: Typical laps 100mm, 110mm
- Maximum Gauge: 245-250mm
- Covering Capacity (net slates /m²): 13.4 at 100mm lap, 13.6 at 110mm lap
- Weight of Tiling (approx. kg/m²): 100mm lap 20.4 (0.20 kN/m²), 110mm lap 20.9 (0.20 kN/m²)
- Battens Required (net lin.m/m²): 4.00 at 100mm lap, 4.08 at 110mm lap
- Batten Size Recommended (fixed to BS 5534): 38 x 25mm for rafters/supports not exceeding 450mm centres. 50 x 25mm for rafters/supports not exceeding 600mm centres
- Tile Nails: 30mm x 2.65mm
- Fixing clips: 14 gauge self sealing screws
Please Note: These tiles are sold in bands of 15.
Note: This product range was previously named “Marley Eternit”.
